How to Remove Your Driver Head from the Shaft

Golf Equipment
1

If you’re looking to take the head off your golf driver for repairs, adjustments, or travel convenience, you’ve come to the right place! Here’s a simple guide on how to safely detach your driver head from the shaft:

Tools You’ll Need:

  • A shaft puller or a heat gun
  • A soft cloth or towel
  • A rubber mallet (optional)
  • Epoxy (if you’re reattaching)

Step-by-Step Process:

  1. Heat the Bond Area: If you’re using a glue joint, apply heat gently to the area where the head and shaft meet. Be careful not to overheat it, as this might damage the shaft.
  2. Use the Shaft Puller: If you have a shaft puller, secure it around the head of the driver. Gradually apply force to pull the head away from the shaft. Make sure to do this slowly to avoid any damage.
  3. Wiggle and Pull: If you don’t have a tool handy, you can gently wiggle the head while pulling it away from the shaft. This might take some extra effort, but it can be effective.
  4. Clean the Shaft End: Once removed, clean up any old epoxy left on the shaft for a smooth reattachment later.

Tips:

  • Always wear protective gloves if using heat.
  • Be patient! Forcing it can lead to damage.

If you have any specific questions or tips, feel free to share! Happy golfing!

2

To remove your driver head safely, you will need a torque wrench, a heat gun, and possibly a shaft pulling device. Always take precautions to avoid damaging the shaft!

3

I’ve also found that a good grip and patience are key! Rushing can lead to a broken shaft.

3 Likes
4

Definitely! Just be careful not to overheat the shaft. A little goes a long way!

5

Don’t forget to use a heat gun to loosen the epoxy! It makes a huge difference in the removal process.

5 Likes
6

Is there a specific temperature you recommend for using the heat gun? I don’t want to damage anything.

7

I’ve had success with around 250 degrees Fahrenheit. Just keep it moving to prevent hotspots!

8

That’s great info! I also suggest using an oven mitt to handle hot components.

8 Likes
9

Has anyone tried using a shaft pulling device? Are they worth the investment?

10

Absolutely! A shaft pulling device can save you a lot of frustration if you do this regularly. It’s a great tool to have in your arsenal.

2 Likes
11

I still prefer the manual way. It’s more satisfying to do it yourself, but to each their own, I guess. Just be ready for a workout!

12

For sure, but I think it’s about efficiency too. Why struggle when there are tools to help?

13

When using a torque wrench, it’s important to set it correctly to avoid crushing the head. Does anyone have a torque setting recommendation?

14

I usually set mine to around 10-12 ft-lbs. This seems to work well without any force issues.

15

I’m just here for the tips on avoiding broken shafts! No one wants an expensive lesson.

16

Haha, right? It can be a pain. Just take your time, and remember, patience is key!

17

To start, you’ll need a few tools: a shaft clamp, a heat gun, and some epoxy remover. It’s crucial to prepare your workspace to avoid any mess while you work on removing the driver head.

18

Great tip! I’ll make sure to have my workspace organized before I attempt this. What kind of surface do you recommend?

19

When using the heat gun, apply heat around the hosel for about a minute. This will soften the epoxy, making it easier to remove the clubhead from the shaft. Just be sure to keep the heat moving to avoid damage!

20

Do I need to worry about melting anything nearby while using the heat gun?

7 Likes